However, what I find strange if the system partition was in RAID 1 is that no file system is detected.Īs this NAS is running Windows, I expected the system partition being NTFS or so. So, my assumption is that there might be some RAID 1 by default for the system partition, on which Windows Storage Server 2008 R2 Essentials should be installe, as there is such license sticker at the back pane of the NAS, and then from within Windows, the description of some logical drive, spanning over the remaining space of all drives, or alternatively RAID 5. However, the manual suggests that the maximal RAID 1 storage capacity for this system is 2 TB, and this is also in contractiction which the size of the third partition (5528.78 GB), which suggests that at least three drives are used. The identical partititioning shemes of drives #1 and #2 could suggest this. The computer technician who usually cares for this company believes that the system was in RAID 1. So, there is some conflict between the two drives, as they were same.ĭrive #3 as well as drive #4 have a unique RAW partition which covers all the drive. Will try next startup in 1 seconds.Ĭould not start server: Connect to SAP gateway failedĬonnect_PM TPNAME=SLD_NUC, GWHOST=lpc1, GWSERV=sapgw54ĮRROR partner not reached (host 192.168.1.10, service sapgw54)ĮRRNO TEXT WSAECONNREFUSED: Connection refusedĬom.sap.mw.jco.JCO$Exception: (129) JCO_ERROR_SERVER_STARTUP: Server startup failed at Wed Apr 19 22:38:37 GMT+08:00 2006.5528.78 RAW When drives #4 is attached to another computer, whilst drive #3 is, it is not "In line" but "Off line" in the disk manager.īut when attached alone, it is becomes "In line". This is caused by either a) erroneous server settings, b) the backend system has been shutdown, c) network problems. #54 22:38:37.134 ERROR .SAPProxyServer: JCO Server exception raised: Server startup failed at Wed Apr 19 22:38:37 GMT+08:00 2006.
I have installed WAS Java Only system, the SLD supplier is able to push the data into SLD using HTTP SLD Supplier of Visual Admin.īut now I would like to push an ABAP system's data over, so I try to configure the Data Supplier Bridge in SLD, but hit the following error, so unable to RZ70 as well:
0 kommentar(er)
